Micromax A116 is third update from Micromax 1. S9201_MP_F4_B1_IN_MMX_0.12 then 2. S9201_MP_F4_B1_IN_MMX_0.16 and now 3. S9201_MP_F4_B1_IN_MMX_0.20. This version also work grate. Here we go to update Canvas HD A116
1. Stock Rom S9201_MP_F4_B1_IN_MMX_0.20 for Micromax A116 Click here to download
2. SP-Tool for A116HD Click here to download
3. Driver for Micromax A116Click here to download
(Driver already in phone flash drive if you don’t have these driver then install it)
We installed this Rom update in this phone, it is very simple but we did it very careful so you will careful read then do it. Follow these Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder where you want
3. Extract and open the SP Flash Tools. sptool.exe Run as Administrator
4. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.20_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
6. Switch off your phone and Remove the battery after few minute attach battery don’t switch on your phone. (Make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Note:- Don't interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
10. After the process completes, a green ring will appear.
11. Disconnect your phone. Now your phone is updated
1. Stock Rom S9201_MP_F4_B1_IN_MMX_0.20 for Micromax A116 Click here to download
2. SP-Tool for A116HD Click here to download
3. Driver for Micromax A116Click here to download
(Driver already in phone flash drive if you don’t have these driver then install it)
We installed this Rom update in this phone, it is very simple but we did it very careful so you will careful read then do it. Follow these Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder where you want
3. Extract and open the SP Flash Tools. sptool.exe Run as Administrator
4. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.20_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
6. Switch off your phone and Remove the battery after few minute attach battery don’t switch on your phone. (Make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Note:- Don't interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
10. After the process completes, a green ring will appear.
11. Disconnect your phone. Now your phone is updated
If you have any problem then read this post it will help you to update ClickHere
"How to Root Micromax A116" Click Here
I have installed samsung rom on my canvas hd a116. can i install this update to my phone.
ReplyDelete