Micromax A116
is very nice phone in this price range. This phone have good performance & graphic.
It was release with Jelly Bean already but Micromax release new update of this
phone. It is call V2 Rom. This version also work grate. Micromax make some
change in this ROM. Have a look:-
1. with a fix
of unable to install Flip board application.
2. with a fix
of auto rotation issue.
3. Live
wallpaper is integrated as an option for user to set as manual.
4. M! Store application
is removed.
Downloads:-
1. Stock Rom V2
of Micromax A116
2. SP-Tool for
A116HD
3. Driver for
Micromax A116Click here to download
(Driver already in phone flash drive if you don’t have these driver then install it)
4. Stock Rom V1 of Micromax A116
(Driver already in phone flash drive if you don’t have these driver then install it)
4. Stock Rom V1 of Micromax A116
We installed
this Rom update in this phone, it is very simple but we did it very careful so
you will careful read then do it. Follow these Steps:-
1. Install
drivers for your phone using Micromax drivers.
2. Extract the
Stock ROM folder where you want
3. Extract and
open the SP Flash Tools. sptool.exe Run as Administrator
4. Click on
Scatter-Loading and the program will ask you the location of the scatter
loading file for your device. In the extracted folder of the stock rom, go to
the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select
the file "MT6589_Android_scatter_emmc" which is our scatter loading
file.
6. Switch off
your phone and Remove the battery after few minute attach battery don’t switch
on your phone. (Make sure it is switched off).
7. In Flash
Tool, go to Options and Click USB Mode so that it is enabled. Click options
again and then go to DA Download All > Speed and finally select High Speed.
8. Click the
Download option and the flash tool will start looking for your phone.
9. Connect
your phone now. The Flash Tool will start the flashing process, the progress of
which can be viewed from a yellow progress bar at the bottom of the flash tool.
Note:- Don't interrupt this process as it can
potentially brick your device. Make sure no power interruption takes place.
10. After the
process completes, a green ring will appear.
11. Disconnect
your phone. Now your phone is updated
Read this post "How to Root Micromax A116"
0 comments:
Post a Comment